CM 800

Professional Cabling Tester and Network Diagnostic Tool

 

DATASHEET ENQUIRY WISHLIST

  • Features
  • Specifications
  • Download

Features

FEATURES

  • Tests network and coaxial cables (RJ45 jack and F-type connector)
  • Displays wire map in graphical format for rapid troubleshooting
  • Determines cable length and distance to the cable fault performing a full TDR measurement
  • Cable/port identification using the cable/port ID remotes
  • PoE detection and load test
  • Link test up to 1 Gb/s to identify link capability and current link status
  • Pinging of individual or lists of IPv4 and IPv6 addresses as well as any URL on internet
  • Network Discovery creates lists of broadcasted devices
  • CDP/LLDP/NDP and VLAN discovery
  • High resolution color display for excellent readability in any environment
  • Generation of test reports and documentation with PC-based reporting software

Specifications

SPECIFICATION VIEW

General specifications

Measurement TechnologyTime Domain Reflectometry (TDR) and capacity
Cable Measurements
Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Supports 8 continuity and ID numbers remotes (RJ 45)
Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE)
Active EthernetIndicates advertised speeds of 10/100/1000 base-T half or full duplex
Can Link to network at 10/100 base-T
Network Discovery Test
Discovers and displays attached network devices
Ping IPv4/URL/IPv6
DHCP/DNS Test
LLDP/CDP identification
TCP/UDP Connectivity test
Port LED blink link in 0,1 Hz-steps
Reporting
PDF/CSV reports with PC- Software
Maximum Voltage
Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
RJ Jack: 66 Vdc or 55 Vac
F-connector: 50 Vdc or Vac
Save Test Results
Stores up to 250 Cable or network tests with user defined names
Tone Generation
Tone Frequencies: 730 Hz and 1440 Hz
Languages
English, French, German, Spanish

Battery Life

For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating - 20 hours typical
Standby - 1.5 years typical
(200 uA max standby current), Batteries are included
Altitude
10.000 ft (3048 m) operating
Temperature

Operating: 32 to 122°F (0 to 50°C)

Storage: -22 to 140°F (-30 to 60 °C)

Humidity
10 to 90% non-condensing
Enclosure
High-strength PC/ABS plastic with VO rating with boot
Withstands 4 foot drop on to concrete
Display
Full color graphical LCD with 7,1 cm diagonal
Size
1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm)
Weight
With batteries: 1 lb 2 oz (510 g)
Safety Compliance
CE conforming

Download

DOWNLOAD VIEW